Vehicle Wiring Details for your
2004-2007 Ford Taurus Wiring Diagram | Printer Friendly
Version |  | | Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2004-2007 Ford Taurus . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
| | |  | | PART | COLOR | LOCATION | | 12 VOLT CONSTANT | LIGHT GREEN/PURPLE (+) | @ IGNITION SWITCH HARNESS | | STARTER | RED/LIGHT BLUE (+) | @ IGNITION SWITCH HARNESS | | STARTER 2 | N/A | | | IGNITION 1 | RED/LIGHT GREEN (+) | @ IGNITION SWITCH HARNESS | | IGNITION 2 | BLACK/LIGHT GREEN (+) | @ IGNITION SWITCH HARNESS | | IGNITION 3 | N/A | | | ACCESSORY/HEATER BLOWER 1 | GRAY/YELLOW (+) | @ IGNITION SWITCH HARNESS | | ACCESSORY/HEATER BLOWER 2 | N/A | | | KEYSENSE | N/A | | | PARKING LIGHTS ( - ) | N/A | | | PARKING LIGHTS ( + ) | BROWN (+) | @ SJB, BOTTOM Plug, Pin 31, See NOTE #2 | | POWER LOCK | PINK/YELLOW (TYPE B) | @ GEM. 26-Pin Plug, Pin 18, See NOTE #2 | | POWER UNLOCK | PINK/LIGHT GREEN (TYPE B) | @ GEM, 26-Pin Plug, Pin 6, See NOTE *#2 | | DOOR TRIGGER | See NOTE #3 | @ GEM, See NOTE #2 | | DOMELIGHT SUPERVISION | BLACK/LIGHT BLUE (+) | @ SJB, TOP Plug, Pin 22, See NOTE #2 | | TRUNK RELEASE | PURPLE/YELLOW (-) | @ GEM, 26 Pin Plug, Pin 3, See NOTE #4 | | SLIDING POWER DOOR | N/A | | | HORN | DARK BLUE (-) | @ SJB, BOTTOM Plug, Pin 1, See NOTE #2 | | TACH | Any wire that is NOT RED (AC) | @ any IGNITON COIL or FUEL INJECTORS | | WAIT TO START LIGHT | N/A | | | BRAKE | RED/LIGHT GREEN (+) | @ SWITCH ABOVE BRAKE PEDAL | | FACTORY ALARM DISARM | PINK/WHITE (-) | @ GEM, 26-Pin Plug, Pin 4, See NOTE #2 | | ANTI-THEFT | FORD'S ANTI-THEFT TRANSPONDER SYSTEM, SEE NOTE #1 | TRANSPONDER @ IGNITION SWITCH TUMBLER | | EXTRA INFORMATION | | NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a Bypass module 791, use this module IF you have a extra ignition key to place inside the 791 to remote start, if you do not have an extra key to use or wish not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS MODULE that does not require a key to be placed inside the bypass module, this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS MODULE PAGE on this website. NOTE #2: The GEM (Generic Electronic Module) is part of the SJB (Smart Junction Box) located to the LEFT of the STEERING COLUMN. the SJB HAS (3) Plugs all are on the BOTTOM. NOTE #3: these wires are at the 26-Pin Plug at the GEM, this vehicle has 4 door pin triggers, the DRIVERS DOOR is a YELLOW/BLACK (-) Pin 5, PASSENGER DOOR is a GRAY/RED (-) Pin 19 DRIVERS REAR DOOR is a LIGHT GREEN/YELLOW (-) Pin 20 and the PASSENGER REAR DOOR is a PINK/LIGHT BLUE (-) Pin 7. When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM. NOTE #4: On vehicles WITH a FACTORY KEYLESS ENTRY the TRUNK RELEASE wire is a PURPLE/YELLOW (-) on vehicle WITHOUT a FACTORY KEYLESS ENTRY, it is a GRAY/RED (+) at the Trunk Release switch. On Station Wagons to release the rear hatch, use the YELLOW/LIGHT GREEN (-) wire in the 26-Pin Plug of the GEM. | | | | | | Posted by: ferdinandtakaoka.blogspot.com
Source: http://www.commandocaralarms.com/wiring/2004-2007/ford/taurus/826.html
Komentar
Posting Komentar